Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] Preparing an Image file for BoXZY
[* black] When preparing an image file to Etch, you will need to have your image file scaled relative to BoXZY's native resolution, which is 254 pixels per inch. '''Note that the BoXZY tab is not an image editor, especially for scaling. Use the image editor of your choice to scale and modify images before loading into BoXZY '''
[* black] When preparing an image file to Etch, you will need to have your image file scaled relative to BoXZY's native resolution, which is 254 pixels per inch. '''Note that the BoXZY tab is not an image editor, especially for scaling. Use the image editor of your choice to scale and modify images before loading into BoXZY '''
[* black] Take note of the orientation of BoXZY in the left window of the Preview pane:
[* blue] The blue arrow points to the pulley cover for the Y axis
[* orange] The orange arrow points to the X/Y Home axes. This is where all images will be first placed when uploading
[* green] The green circle indicates a red crosshair, which shows where the Laser Attachment is centered over
[* icon_note] You may have to modify your image orientation depending on how you place your objectmaterial within BoXZY
[* icon_note] You may have to modify your image orientation depending on how you place your objectmaterial within BoXZY
[* black] When creating your image file to be an exact size you will need to understand that one(1) pixel is 0.1mm
[* icon_reminder] For example, if an image needs to be 20mm wide the file needs to be 200 pixels wide in the file creation program