Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Alignment Panel Test: Part 2
[* blackgreen] Use the X and Y directional pad on the Alignment Panel to move the Laser beam over the image, particularly the dot in the middle of the circle. The red crosshair represents the physical Laser Attachment beam over the digital image.
[* blackgreen] Use the X and Y directional pad on the Alignment Panel to move the Laser beam over the image, particularly the dot in the middle of the circle. The red crosshair represents the physical Laser Attachment beam over the digital image.
[* icon_note] This will allow you to see where exactly each part of an image will etch onto whatever object you have placed in BoXZY
[* blackred] Using the X and Y directional pad, move the red crosshair around to each corner of the square
[* blackblue] At each corner, look at the projected blue dot. This is the extent to where each corner of the square will be etched.
[* blackred] Using the X and Y directional pad, move the red crosshair around to each corner of the square
[* blackblue] At each corner, look at the projected blue dot. This is the extent to where each corner of the square will be etched.
[* icon_reminder] Using the red crosshair can help you determine where your image will appear on your material
[* black] On the Process Panel, ''Select'' the '''Print''' button to begin the Square Circle file and watch your BoXZY perform the BoXZY Alignment Panel Test
[* icon_caution] Put your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laser is wearing Laser Safety Glasses

Image 2

Old Version

New Version

Image 3

Old Version

New Version