Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Alignment Panel Test: Part 2
[* green] Use the X and Y directional pad on the Alignment Panel to move the red crosshair to the dot in the middle of the circle we're trying to engrave. The red crosshair represents the physical location of the Laser Attachmentlow power beam relative to where it will be when engraving that exact portion of the your chosenloaded image. This is how we align our material
[* green] Use the X and Y directional pad on the Alignment Panel to move the red crosshair to the dot in the middle of the circle we're trying to engrave. The red crosshair represents the physical location of the Laser Attachmentlow power beam relative to where it will be when engraving that exact portion of the your chosenloaded image. This is how we align our material
[* yellow] You can also use the X and Y boxes (shown in yellow) to more finely move the red crosshair/Laser Attachment
[* icon_note] This will allow you to see where exactly each part of an image will etch onto whatever object you have placed in BoXZYBoXZY. Remember, the actual position of the projected beam inside the machine is shown by the position of the crosshair over the XY plane
[* icon_note] This will allow you to see where exactly each part of an image will etch onto whatever object you have placed in BoXZYBoXZY. Remember, the actual position of the projected beam inside the machine is shown by the position of the crosshair over the XY plane
[* red] Using the X and Y directional pad, move the red crosshair around to each corner of the square
[* blue] At each corner, look at the projected blue dotlaser dot inside the machine. This is the extent to where each corner of the square will be etched.
[* blue] At each corner, look at the projected blue dotlaser dot inside the machine. This is the extent to where each corner of the square will be etched.
[* icon_reminder] Using the red crosshair can help you determine where your image will appear on your material
[* black] On the Process Panel, ''Select'' the '''Print''' button to begin the Square Circle file and watch your BoXZY perform the BoXZY Alignment Panel Test
[* icon_caution] PutKeep your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laser is wearing Laser Safety Glasses
[* icon_caution] PutKeep your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laser is wearing Laser Safety Glasses