Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] Alignment Panel Test: Part 2
[* green] Use the X and& Y directional pad on the Alignment Panel (green box in image 1) to move the red crosshair'''red crosshairs''' to the dot in the middle of the circle we're trying to engrave(shown in image 2). The red crosshair representscrosshairs show the '''blue dot's physical location of the low power beam relative to where it willit'll be when engraving that exact portionpart of your loaded image.image.''' This is how weyou align our materialyour material.
[* yellow] You can also use the X and Y boxes (shown in yellowthe yellow box in image 1) to more finely move the red crosshair/Laser Attachmentcrosshairs/Laser Head.
[* icon_note] This will allowallows you to see wherepreview exactly where each part of an image will etch onto whatever object you have placed in BoXZY. Remember,your material. Remember: the actual position of the projected beam inside the machine is shown by the position of the crosshaircrosshairs over the XY planeX, Y plane.
[* red] Using the X and Y directional pad, move the red crosshair around to each corner of the squaresquare, as shown in image 3.
[* blue] At each corner, look at the projected blue laser dot inside the machine. This is the extent to where each corner of the square will be etchedetched onto your material.
[* icon_reminder] Using the red crosshaircrosshairs can help you determine where yourthe image will appear on your materialmaterial.
[* black] OnIn the Process Panel, ''Select''click the '''Print''' button to begin the Square Circle image and watch your BoXZY perform the BoXZY Alignment Panel Test. After the Testtest is finished, press your E-Stop on your BoXZY Power Supply and'''physical e-stop''' and examine your BoXZY Alignment Panel Test. It should look similar to the Square Circle imageimage.
[* icon_caution] Keep your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laserlaser is wearing Laser Safety GlassesGlasses.
[* green] Use the X and& Y directional pad on the Alignment Panel (green box in image 1) to move the red crosshair'''red crosshairs''' to the dot in the middle of the circle we're trying to engrave(shown in image 2). The red crosshair representscrosshairs show the '''blue dot's physical location of the low power beam relative to where it willit'll be when engraving that exact portionpart of your loaded image.image.''' This is how weyou align our materialyour material.
[* yellow] You can also use the X and Y boxes (shown in yellowthe yellow box in image 1) to more finely move the red crosshair/Laser Attachmentcrosshairs/Laser Head.
[* icon_note] This will allowallows you to see wherepreview exactly where each part of an image will etch onto whatever object you have placed in BoXZY. Remember,your material. Remember: the actual position of the projected beam inside the machine is shown by the position of the crosshaircrosshairs over the XY planeX, Y plane.
[* red] Using the X and Y directional pad, move the red crosshair around to each corner of the squaresquare, as shown in image 3.
[* blue] At each corner, look at the projected blue laser dot inside the machine. This is the extent to where each corner of the square will be etchedetched onto your material.
[* icon_reminder] Using the red crosshaircrosshairs can help you determine where yourthe image will appear on your materialmaterial.
[* black] OnIn the Process Panel, ''Select''click the '''Print''' button to begin the Square Circle image and watch your BoXZY perform the BoXZY Alignment Panel Test. After the Testtest is finished, press your E-Stop on your BoXZY Power Supply and'''physical e-stop''' and examine your BoXZY Alignment Panel Test. It should look similar to the Square Circle imageimage.
[* icon_caution] Keep your Laser Safety Glasses on and make sure that anyone in viewing distance of the Laserlaser is wearing Laser Safety GlassesGlasses.