Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] PreparingPrepare the Milling AttachmentHead
[* icon_caution] This guide assumes you have read guides 0.0 -1.3black] Un-box your Milling Head and are using safe practices.
[* black] '''Unbox '''your milling attachment
[* black] '''Attach'''
attach your preferred milling bitbit.
[* blackicon_note] The milling attachment usesMilling Head accepts a 1/4" diameter shaft milling bit secured in a Collet. A carbide two flute endmill is provided and works well on many different materials
[* icon_note]
collet. You are able tocan use any bit with a 1/4" shaft diameter milling bit. You are also able todiameter, or you can use a 1/4" collet reducer for bits with smaller shaft diameter bits withdiameters.
[* icon_note] We recommend using
a ''Collet Reducer''carbide two-flute endmill, which works well on many different materials.
[* black] Set the milling attachmentOnce you've installed your bit, set aside the Milling Head for later use. '''Do not'''Don't insert the Milling AttachmentHead into BoXZY just yet.
[title] PreparingPrepare the Milling AttachmentHead
[* icon_caution] This guide assumes you have read guides 0.0 -1.3black] Un-box your Milling Head and are using safe practices.
[* black] '''Unbox '''your milling attachment
[* black] '''Attach'''
attach your preferred milling bitbit.
[* blackicon_note] The milling attachment usesMilling Head accepts a 1/4" diameter shaft milling bit secured in a Collet. A carbide two flute endmill is provided and works well on many different materials
[* icon_note]
collet. You are able tocan use any bit with a 1/4" shaft diameter milling bit. You are also able todiameter, or you can use a 1/4" collet reducer for bits with smaller shaft diameter bits withdiameters.
[* icon_note] We recommend using
a ''Collet Reducer''carbide two-flute endmill, which works well on many different materials.
[* black] Set the milling attachmentOnce you've installed your bit, set aside the Milling Head for later use. '''Do not'''Don't insert the Milling AttachmentHead into BoXZY just yet.