Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Prepare BoXZY for Milling the Test File
[* black] Un-box your Milling Head and attach the provided 1/4" 2 flute carbide endmill (bit).
[* icon_reminder] When you install your bit, you need to screw it in tight enough that your work material won't pull it out, but not too tight or else it could lead to other problems. It takes practice to figure out the right amount of torque.
[* icon_note] The Milling Head accepts 1/4" diameter shafts. Many different sized bits and endmills are available with a 1/4" shaft diameter. You can also use a collet reducer for bits with smaller shaft diameters.
[* black] Once you've installed your bit, set aside the Milling Head for later use.
[* icon_reminder] Don't insert the Milling Head into BoXZY or plug it into the Power Station just yet.
[* black] ++needs to be tight enough that it's not possible for material to pull bit out but it can't be too tight that it's impossible to move the bit or you can have other consequences.++