Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Inserting your Milling Material
[* red] '''Move''' your '''Z''' axis in a ''positive'' direction to move the Milling Platform ''down'' which will allow your to fit your sacrificial material and milling material onto the milling platform
[* red] Use the '''Z positive 10mm button''' in the Manual Control tab in your BoXZY Interface
[* icon_reminder] When you '''Secure''' both your ''milling material'' and ''sacrificial plate'' do so firmly. They must be able remain still while handling substantial force. Milling operations will put a significant amount of force into your material
[* green] The ''second'' and ''third images'' show ''green arrows'' indicating the methods of clamping onto your Milling Material and bolting through your Milling Material and the Milling Platform
[* green] To bolt your Material to the Milling Platform place your material on the Milling Platform and use the perforations on the Milling Platform to mark your material from underneath. Drill this material and use a long enough bolt to secure your material firmly to the Milling Platform
[* violet] For beginners and first timers place your ''Sacrificial Board'' on the ''Milling Platform'' and place your Milling Material parallel with the Y axis on top, in this case it will be a piece of wood
[* violet] Use the C-clamps we have provided to secure both the Milling Material and the Sacrificial Board to the Milling Platform

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added