Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Insert the Milling Head
[* violet] Insert
and Get Ready to Set the Z Start Point
[* black] If necessary, lower the Milling Platform so that you have enough space to install
your Milling Head so that your bit does not touch the main body ofmaterial.
[* black] Insert
the router is either flush or below the bottom ofMilling Head into the Attachment Mount, as shown by the purple arrowMount and temporarily clamp it in the second image.
[* icon_reminder]
place. '''Do not''' connect the Milling Head to power at this time.
[* black] Leave at least 1" between the top of your material and the bottom of your bit, as indicated in green in the third image. You may have to lowerNow move the Milling Platform to create enough space.
[* black] Lock
back up toward the Milling Head into the Attachment Mount once you've madebit until you’re within 1” of it but not close enough room between the material andto touch the bit.
[title] Insert the Milling Head
[* violet] Insert
and Get Ready to Set the Z Start Point
[* black] If necessary, lower the Milling Platform so that you have enough space to install
your Milling Head so that your bit does not touch the main body ofmaterial.
[* black] Insert
the router is either flush or below the bottom ofMilling Head into the Attachment Mount, as shown by the purple arrowMount and temporarily clamp it in the second image.
[* icon_reminder]
place. '''Do not''' connect the Milling Head to power at this time.
[* black] Leave at least 1" between the top of your material and the bottom of your bit, as indicated in green in the third image. You may have to lowerNow move the Milling Platform to create enough space.
[* black] Lock
back up toward the Milling Head into the Attachment Mount once you've madebit until you’re within 1” of it but not close enough room between the material andto touch the bit.

Image 2

Deleted

Image 3

Deleted