Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] Insert the Milling Head
[* violet] Insertblack] If necessary, lower the Milling Platform so that you have enough space to install your Milling Head so that it's either flush or belowyour bit does not touch the bottom ofmaterial.
[* black] Insert the Milling Head into
the Attachment Mount, as shown by the purple arrowMount and temporarily clamp it in the second image.
[* icon_reminder]
place. '''Do not''' connect the Milling Head to power at this time.
[* black] Leave at least 1" betweengreen] Now move the topMilling Platform back up toward the bit until you’re within 1” of your material andit but not close enough to touch the bottom of your bit, as indicated in greenshown in the thirdsecond image. You may have to lower the Milling Platform to create enough space.
[* black] Lock the Milling Head into the Attachment Mount once you've made enough room between the material and the bit.
[* violet] Insertblack] If necessary, lower the Milling Platform so that you have enough space to install your Milling Head so that it's either flush or belowyour bit does not touch the bottom ofmaterial.
[* black] Insert the Milling Head into
the Attachment Mount, as shown by the purple arrowMount and temporarily clamp it in the second image.
[* icon_reminder]
place. '''Do not''' connect the Milling Head to power at this time.
[* black] Leave at least 1" betweengreen] Now move the topMilling Platform back up toward the bit until you’re within 1” of your material andit but not close enough to touch the bottom of your bit, as indicated in greenshown in the thirdsecond image. You may have to lower the Milling Platform to create enough space.
[* black] Lock the Milling Head into the Attachment Mount once you've made enough room between the material and the bit.

Image 2

Old Version

New Version

Image 3

Deleted