Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Badley Bratt

Edit approved by Badley Bratt

Deleted
Added
Unchanged

Step Lines

[title] Inserting the Milling Attachment
[* black] Lower the Milling Platform enough so that there is room to insert your Milling Attachment with a milling bit in it
[* violet] Insert your Milling Attachment so that the Milling Attachment is either '''flush''' or '''below''' the bottom of the Attachment Mount, this is shown in the ''second image'' and indicated with ''purple''
[* icon_note] '''Do Not''' plug the Milling Attachment into ''any ''power outlet
[* black] There should be a significant amount space between the bit and the Milling Platform. You will lower the Milling Attachment to touch your Milling Material ''later''
[* black] Leave space, at least 1", between the top of your Milling Material or Milling Platform and the bottom of your Milling Bit and lock the Milling Attachment in the Attachment Mount
[* black] You will use the extra space between the bit and the Milling Material or Milling Platform to set your Starting Point for the Z axis later in this guide

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added