Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Insert the Milling Head and Get Ready to Set the Z Start Point
[title] Insert the Milling Head and Get Ready to Set the Z Start Point
[* black] If necessary, lower the Milling Platform so that you have enough space to install your Milling Head so that your bit does not touch the material.
[* black] Insert the Milling Head into the Attachment Mount and temporarily clamp it in place. '''Do not''' connect the Milling Head to power at this time.
[* green] Now move the Milling Platform back up toward the bit until you’re within 1” of it but not close enough to touch the bit, as shown in the second image.