Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Insert the Milling Head
[* black] If necessary'''If necessary''', lower the Milling Platform so that you haveto create enough space in order to install yourthe Milling Head so that your bit does not touchand still leave space between the material and the materialbit.
[* black] Insert the Milling Head into the Attachment Mount and temporarilyso that the base is nearly flush with the bottom of the Attachment mount. Then '''temporarily''' clamp it in place. '''Do not''' connect the Milling Head to power at this time.
[* green] Now move the Milling Platform back up toward the'''toward '''the bit until you’re within roughly 1” of itit, but not close enough to touch the bit, as shown in the second image.
[* black] If necessary'''If necessary''', lower the Milling Platform so that you haveto create enough space in order to install yourthe Milling Head so that your bit does not touchand still leave space between the material and the materialbit.
[* black] Insert the Milling Head into the Attachment Mount and temporarilyso that the base is nearly flush with the bottom of the Attachment mount. Then '''temporarily''' clamp it in place. '''Do not''' connect the Milling Head to power at this time.
[* green] Now move the Milling Platform back up toward the'''toward '''the bit until you’re within roughly 1” of itit, but not close enough to touch the bit, as shown in the second image.