Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Insert the Milling Head
[* black] '''If necessary'''If necessary, lower the Milling Platform to create enough space in order to install the Milling Head and still leave space between the material and the bit.
[* black] Insert the Milling Head into the Attachment Mount so that its base is nearly flush with the bottom of the Attachment mount. Then '''temporarily'''temporarily clamp it in place. '''Do not''' connect the Milling Head to power at this time.
[* green] Now move the Milling Platform back up '''toward '''thetoward the bit until you’re within roughly 1” of it, but not close enough to touch the bit, as shown in the second image.
[* black] '''If necessary'''If necessary, lower the Milling Platform to create enough space in order to install the Milling Head and still leave space between the material and the bit.
[* black] Insert the Milling Head into the Attachment Mount so that its base is nearly flush with the bottom of the Attachment mount. Then '''temporarily'''temporarily clamp it in place. '''Do not''' connect the Milling Head to power at this time.
[* green] Now move the Milling Platform back up '''toward '''thetoward the bit until you’re within roughly 1” of it, but not close enough to touch the bit, as shown in the second image.