Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Go to User Home and Load the Test File
[* black] Make sure that there is at least one inch (1") of distance between your Milling Bit and Milling Material. You may have to adjust the Milling Platform
[* red] Type '''G1 X0 Y0''' into your Gcode Sender and select '''Send'''
[* red] This Gcode will move the Milling Attachment to the ''User Home'' we just defined in step #10, if it is not already there
[* black] Go to [https://drive.google.com/a/boxzy.com/file/d/0B0gOyqLrz4L-d2ZpZWhZVnAydURyUnBPSnpSX00xTTk2d0xB/view?pref=2&pli=1|THIS LINK] and download the Milling.Test.Gcode.NC file we have prepared for you to test in this guide
[* black] In your BoXZY Interface select the '''Load''' button, this is indicated by the ''blue arrow'' in the ''third image''
[* black] '''Locate''' and '''Open '''the Milling.Test.Gcode.NC

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added