Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] GOES SECONDplug in
[* black] MOVE
TO LASTPREVIOUS STEP? use the g1 command to send machine back to 0 and then undo the clamp the z drop back down onto material undoing the air pass height reset
[title] GOES SECONDplug in
[* black] MOVE
TO LASTPREVIOUS STEP? use the g1 command to send machine back to 0 and then undo the clamp the z drop back down onto material undoing the air pass height reset
[* black] Insert the Milling Attachment into the Attachment Mount and lock it
[* black] Plug the Milling Attachment into the BoXZY Power Station, as shown in the ''first image''
[* icon_reminder] Make sure the manual e-stop is pressed down before plugging in the milling attachment
[* icon_reminder] Make sure the power is off on the milling attachment
[* yellow] The Milling Attachment is powered '''ON''' when the "line" is pressed down, indicated by the ''yellow arrow ''in the ''second image''
[* red] The Milling Attachment is powered '''OFF''' when the "circle" is pressed down, indicated by the ''red arrow'' in the ''second image''
[* icon_reminder] '''Never''' plug the Milling Attachment into an outlet that is ''not'' on the BoXZY Power Station. The outlet is there so that the e-stop will turn the Milling Attachment Off. This is for your safety