Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Badley Bratt

Edit approved by Badley Bratt


Step Lines

[title] Turn power on and set spindle speed.
[* yellow] Flip the Milling Attachment Power Switch so that is is on, this is indicated by the ''yellow arrow ''in the ''first image''
[* red] Adjust to the correct spindle speed using the dial at the top of the milling attachment. Red arrow points to this. 1 is the slowest setting and 6 is the fastest. The milling attachment spins between 10,000 and 30,000 RPM, depending on where you have set the dial
[* red] Adjust the RPM '''Speed''' of your Milling Attachment to the number '''4''' by turning the Red dial above the Power Switch, this is indicated by the ''red arrow'' in the'' first image''
[* icon_note] The Milling Attachment Speed Dial is set between 10,000 RPM and 30,000 RPM. The #6 setting is 30,000 RPM
[* icon_reminder] Keep your BoXZY Power Station near you and be prepared to hit the hardware e-stop

Image 1

No previous image