Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] Turn powerthe Router on and set spindle speedSet Spindle Speed
[* icon_reminder] Keep your BoXZY Power Station near you and be prepared to hit the hardware e-stop after powering on the Milling Head
.
[* yellow] Flip the Milling Attachment Power Switch so that is is on, this isHead power switch to the on position, indicated by the ''yellowyellow arrow ''inin the ''first image''image.
[* red] Adjust to the correct spindle speed to the '''4''' setting using the dial at the top of the milling attachment. Red arrow points to this. 1 is the slowest setting and 6 is the fastest. The milling attachment spins between 10,000 and 30,000 RPM, depending on where you have set the dial
[* red] Adjust the RPM '''Speed''' of your
Milling Attachment to the number '''4''' by turning the Red dial above the Power Switch, this isHead, indicated by the ''red arrow''red arrow in the'' first image''the image.
[* icon_note] The Milling Attachment Speed Dial is setHead's spindle spins between 10,000 RPM and 30,000 RPM. The #6RPM, with the '''1''' setting is 30,000being 10,000 RPM
[* icon_reminder] Keep your BoXZY Power Station near you
and be prepared to hit the hardware e-stop'''6''' as 30,000.
[title] Turn powerthe Router on and set spindle speedSet Spindle Speed
[* icon_reminder] Keep your BoXZY Power Station near you and be prepared to hit the hardware e-stop after powering on the Milling Head
.
[* yellow] Flip the Milling Attachment Power Switch so that is is on, this isHead power switch to the on position, indicated by the ''yellowyellow arrow ''inin the ''first image''image.
[* red] Adjust to the correct spindle speed to the '''4''' setting using the dial at the top of the milling attachment. Red arrow points to this. 1 is the slowest setting and 6 is the fastest. The milling attachment spins between 10,000 and 30,000 RPM, depending on where you have set the dial
[* red] Adjust the RPM '''Speed''' of your
Milling Attachment to the number '''4''' by turning the Red dial above the Power Switch, this isHead, indicated by the ''red arrow''red arrow in the'' first image''the image.
[* icon_note] The Milling Attachment Speed Dial is setHead's spindle spins between 10,000 RPM and 30,000 RPM. The #6RPM, with the '''1''' setting is 30,000being 10,000 RPM
[* icon_reminder] Keep your BoXZY Power Station near you
and be prepared to hit the hardware e-stop'''6''' as 30,000.