Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by Badley Bratt

Edit approved by Badley Bratt


Step Lines

[title] dddsetting spindle speed --> merge into 11
[title] dddsetting spindle speed --> merge into 11
[* black] New line.Keep your BoXZY Power Station near you and be prepared to hit the hardware e-stop after powering on the Milling Head.
[* yellow] Flip the Milling Head power switch to the on position, indicated by the yellow arrow in the image.
[* red] Adjust the spindle speed to the '''4''' setting using the dial at the top of the Milling Head, indicated by the red arrow in the image.
[* icon_note] The Milling Head's spindle spins between 10,000 and 30,000 RPM, with the '''1''' setting being 10,000 RPM and '''6''' as 30,000.