Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Badley Bratt

Edit approved by Badley Bratt

Before
After
Unchanged

Step Lines

[title] loading g-code for start print
[* black] verifyVerify that they've entered g1 z0. Select '''Start Print''' and watch the test file cut '''BoXZY!'''
[* icon_reminder] Keep
your hand near the e-stop
[* icon_reminder] Wear eye protection
[* icon_reminder] Do not put your hands in BoXZY when it the Milling Attachment is Spinning the
bit
[* black] When the file
is done executing it will return to the X0 Y0 Z0 position
[* black] Turn the Milling Attachment '''Off '''and press the e-stop on
touching your Power Station
[* black] You will now have the word BoXZY! cut into
material and your piece of wood , as seenZ0 is in the ''second image''correct position one last time by using the '''G1 Z0''' command.
[* black] verifyVerify that they've entered g1 z0. Select '''Start Print''' and watch the test file cut '''BoXZY!'''
[* icon_reminder] Keep
your hand near the e-stop
[* icon_reminder] Wear eye protection
[* icon_reminder] Do not put your hands in BoXZY when it the Milling Attachment is Spinning the
bit
[* black] When the file
is done executing it will return to the X0 Y0 Z0 position
[* black] Turn the Milling Attachment '''Off '''and press the e-stop on
touching your Power Station
[* black] You will now have the word BoXZY! cut into
material and your piece of wood , as seenZ0 is in the ''second image''correct position one last time by using the '''G1 Z0''' command.