Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Use YourUsing Milling Head as an Aligning Tool During Setupfor Alignment
[title] Use YourUsing Milling Head as an Aligning Tool During Setupfor Alignment
[* icon_note] Throughout this guide, we'll frequently suggest setting your Milling Head into the Attachment Mount so you can use your bit as a tool to align your material to the Milling Platform.
[* black] An easy way to find the center of your bit is to use a thin bit with a sharp point to find the line or edge you're aligning to, as shown in the image. Set your X or Y 0 with the thin, pointed bit and then swap your work bit back into the Milling Head.Head before setting your Z0
[* black] An easy way to find the center of your bit is to use a thin bit with a sharp point to find the line or edge you're aligning to, as shown in the image. Set your X or Y 0 with the thin, pointed bit and then swap your work bit back into the Milling Head.Head before setting your Z0
[* icon_reminder] '''Remember:''' This is a temporary step that should never replace properly installing and locking in the Milling Head prior to setting your Z height and running your file.