Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Just Helping

Edit approved by Just Helping

Deleted
Added
Unchanged

Step Lines

[title] Use YourUsing Milling Head as an Aligning Tool During Setupfor Alignment
[title] Use YourUsing Milling Head as an Aligning Tool During Setupfor Alignment
[* icon_note] Throughout this guide, we'll frequently suggest setting your Milling Head into the Attachment Mount so you can use your bit as a tool to align your material to the Milling Platform.
[* black] An easy way to findInstead of finding the center of your bit is toyou can use a thin bit with a sharp point to find the line or edge you're aligning toalign to an edge, as shown in the image. Set your 0X0 or Y0 with the thin, pointed bit and then swap your work bit back into the Milling Head.Head before setting your Z0
[* icon_reminder] '''Remember:''' This is aThese are temporary step that should never replacesteps, you will still need to properly installingsetup the Z User Home and locking inlock the Milling Headattachment mount prior to setting your Z height and running yourthe file.
[* black] An easy way to findInstead of finding the center of your bit is toyou can use a thin bit with a sharp point to find the line or edge you're aligning toalign to an edge, as shown in the image. Set your 0X0 or Y0 with the thin, pointed bit and then swap your work bit back into the Milling Head.Head before setting your Z0
[* icon_reminder] '''Remember:''' This is aThese are temporary step that should never replacesteps, you will still need to properly installingsetup the Z User Home and locking inlock the Milling Headattachment mount prior to setting your Z height and running yourthe file.