Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Using Milling Head for Alignment
[* icon_note] Throughout this guide, we'll frequently suggest setting your Milling Head into the Attachment Mount so you can use your bit as a tool to align your material to the Milling Platform.
[* black] An easy way to find the center of your bit is to use a thin bit with a sharp point to find the line or edge you're aligning to, as shown in the image. Set your X or Y 0 with the thin, pointed bit and then swap your work bit back into the Milling Head before setting your Z0
[* icon_reminder] '''Remember:''' This is a temporary step that should never replacestep, you will still need to properly installingsetup the Z User Home and locking inlock the Milling Headattachment mount prior to setting your Z height and running yourthe file.
[* icon_reminder] '''Remember:''' This is a temporary step that should never replacestep, you will still need to properly installingsetup the Z User Home and locking inlock the Milling Headattachment mount prior to setting your Z height and running yourthe file.