Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Just Helping

Edit approved by Just Helping

Before
After
Unchanged

Step Lines

[title] Using Milling Head for Alignment
[* icon_note] Throughout this guide, we'll frequently suggest setting your Milling Head into the Attachment Mount so you can use your bit as a tool to align your material to the Milling Platform.
[* black] An easy way to findInstead of finding the center of your bit is toyou can use a thin bit with a sharp point to find the line or edge you're aligning toalign to an edge, as shown in the image. Set your X or Y 0X0 or Y0 with the thin, pointed bit and then swap your work bit back into the Milling Head before setting your Z0
[* icon_reminder] '''Remember:''' This is aThese are temporary stepsteps, you will still need to properly setup the Z User Home and lock the attachment mount prior to running the file.
[* black] An easy way to findInstead of finding the center of your bit is toyou can use a thin bit with a sharp point to find the line or edge you're aligning toalign to an edge, as shown in the image. Set your X or Y 0X0 or Y0 with the thin, pointed bit and then swap your work bit back into the Milling Head before setting your Z0
[* icon_reminder] '''Remember:''' This is aThese are temporary stepsteps, you will still need to properly setup the Z User Home and lock the attachment mount prior to running the file.