Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Nicki

Edit approved by Nicki

Before
After
Unchanged

Step Lines

[title] Grease the spring bolts
[* black] Each BoXZY has threeicon_reminder] We recommend that you level BoXZY's print bed before gluing the magnets. Large differences in the height of the spring bolts can change where the magnet is going to rest. Its very important for 3D printing and laser etching that the magnets are located onsecurely over the Z-axis platformspring bolts and the print bed is level.
[* black] This can be accomplished by following steps 1-4 of the [guide|115|3D Printing with BoXZY] guide. Just for the leveling process you will need to temporarily place a magnet over each spring bolt and rest the unglued print bed on top
.
[* black] ApplyNow to start the process of gluing the magnets, you first apply grease or lubricant to the head of each spring bolt. There are 3 of these that are found in each corner of the Z axis platform. This will prevent excess glue from sticking to the bolts.
[* black] Each BoXZY has threeicon_reminder] We recommend that you level BoXZY's print bed before gluing the magnets. Large differences in the height of the spring bolts can change where the magnet is going to rest. Its very important for 3D printing and laser etching that the magnets are located onsecurely over the Z-axis platformspring bolts and the print bed is level.
[* black] This can be accomplished by following steps 1-4 of the [guide|115|3D Printing with BoXZY] guide. Just for the leveling process you will need to temporarily place a magnet over each spring bolt and rest the unglued print bed on top
.
[* black] ApplyNow to start the process of gluing the magnets, you first apply grease or lubricant to the head of each spring bolt. There are 3 of these that are found in each corner of the Z axis platform. This will prevent excess glue from sticking to the bolts.