Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Nicki

Edit approved by Nicki

Deleted
Added
Unchanged

Step Lines

[title] Secure the back panel to a side panel
[* black] Join the tabs on the edge of the back panel with the slots on the edge of a side panel. (1st Which ever side panel you choose we will call side 1 from now on.(1st picture)
[* black] Join the tabs on the edge of the back panel with the slots on the edge of a side panel. (1st Which ever side panel you choose we will call side 1 from now on.(1st picture)
[* red] Make sure your back panel is in the correct orientation. The side panel is symmetrical from left to right.
[* orange] The top edge of each panel has a single tab in the center.
[* black] Now you can add 3 corner brackets where you see 3 pairs of holes going down the corner joint. Secure the brackets with the M3x8 bolts and M3 hex nuts provided in your enclosure kit. You will need the M2.5 allen key from your BoXZY's Fix-it Kit to get a nice tight hold. A pair of pliers can also be useful but not necessary. (2nd and 3rd picture)
[* red] Make sure the edge of the back panel is flush against the side panel before tightening the bolts all the way.
[* icon_caution] It is possible to crack the acrylic by over tightening the bolts.