Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Load ShinyLaser Gcode for BoXZY into Repeater-Host
[* black] Open '''Repetier -Host''', select '''Load G-Code''', as indicated by the red square in the image. Locate the file you saved from the last step and select ''Open''
[* black]
Open''. Select the Gcode tab in your Repeater-Host interface and examine your Gcode. '''Notice
[* black] '''Notice
''' how the file we have loaded in the image is not positioned in the build area correctly, as indicated with the blue squaresquare.
[* black] You will not be able to reposition the file in Repeater-Host so you will need to reposition your vector(s) as seen in the image, indicated with a blueorange square. Additionally you can change your document size settings to ''165mm x 165mm ''to match the BoXZY Build platform, if desired.
[* black]
Save your file and load it into Repetier-Host
[* black] Open '''Repetier -Host''', select '''Load G-Code''', as indicated by the red square in the image. Locate the file you saved from the last step and select ''Open''
[* black]
Open''. Select the Gcode tab in your Repeater-Host interface and examine your Gcode. '''Notice
[* black] '''Notice
''' how the file we have loaded in the image is not positioned in the build area correctly, as indicated with the blue squaresquare.
[* black] You will not be able to reposition the file in Repeater-Host so you will need to reposition your vector(s) as seen in the image, indicated with a blueorange square. Additionally you can change your document size settings to ''165mm x 165mm ''to match the BoXZY Build platform, if desired.
[* black]
Save your file and load it into Repetier-Host

Image 3

Old Version

New Version