Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Load ShinyLaser Gcode for BoXZY into Repeater-Host
[* black] Open '''Repetier -Host''', select '''Load G-Code''', as indicated by the red square in the image. Locate the file you saved from the last step and select '''Open''' as indicated by the blue arrow'.
[* black] Select the Gcode tab in your Repeater-Host interface and examine your Gcode, as indicated by the red square. '''Notice''' how the file we have loaded in the image is not positioned in the build area correctly, as indicated with the blue square.
[* black] You will not be able to reposition the file in Repeater-Host so you will need to reposition your vector(s) as seen in the image, indicated with a orange square. Additionally you can change your document size settings to ''165mm x 165mm ''to match the BoXZY Build platform, if desired.
[* black] Save your new file and load it into Repetier-Host
[* black] Save your new file and load it into Repetier-Host