Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[* black] In this situation you need to manually movetitle] Focusing the X and Y locations to set a new X0 and Y0 location for your boxy that will allow for the Gcode to travel into negative spaceLaser
[* black] After you have moved you X and Y axis, type '''G92 X0 Y0''' intoWith the Gcode sender, as indicated bylaser head removed, home your '''Z Axis'''. Measure the red box inthickness of the image and then select sendmaterial that you are going to laser. Add that measurement (in millimeters) to laser focus distance of '''50.7mm.'''
[* black] In this situation you need to manually movetitle] Focusing the X and Y locations to set a new X0 and Y0 location for your boxy that will allow for the Gcode to travel into negative spaceLaser
[* black] After you have moved you X and Y axis, type '''G92 X0 Y0''' intoWith the Gcode sender, as indicated bylaser head removed, home your '''Z Axis'''. Measure the red box inthickness of the image and then select sendmaterial that you are going to laser. Add that measurement (in millimeters) to laser focus distance of '''50.7mm.'''