Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by BoXZY

Edit approved by BoXZY

Deleted
Added
Unchanged

Step Lines

[title] Focusing the Laser
[* black] With the laser head removed, home your '''Z Axis'''. Measure the thickness of the material that you are going to laser. Add that measurement (in millimeters) to laser focus distance of '''50.7mm.'''
[* black] Move your Z Axis down(positive) manually in the Repetier-Host controls or with the Gcode sender to the ''combined value you just calculated ''.
[* black] Now type '''G92 Z0''' in the '''Gcode sender''' line and select send to set your Z0 location. Your laser will now be in focus.