Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 3 —

Step Type:

Drag to rearrange

Cut the zip tie holding your Sacrificial Board to the Milling Platform mounted to the Z axis, as seen in the first image for this step.

You will find your Leveling Platform for 3D printing and laser etching in an envelope underneath the Milling Platform. You can remove it using the instructions below:

Tilt your BoXZY away from you so you can access the Z axis belt on the device's underside. Be careful you do not drop your BoXZY backwards!

Hold the belt at a point closest to you and and pull it from right to left, or counter-clockwise (as indicated by red arrows in the second image for this step). This will move the Z axis upwards.

Remove the envelope from your BoXZY when the Z axis is high enough.