Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Drag to rearrange

BoXZY uses 3-point leveling to make sure the nozzle moves perfectly parallel to the platform during X and Y movements. This is a very important initial setup step that only needs to be repeated if the bolts are moved.

More of a visual learner? Watch BoXZY's Assembly Supervisor explain how to level your bed here.

While the Attachment Mount is still empty, use the BoXZY Interface to move the mount above the middle, back bolt on the platform.

The G-code that will position BoXZY where you want it is: G1 X1 Y82.5. You an also use the manual control buttons.

You'll usually want to use a business card to level your platform, but if this is your very first time doing it, follow the guide steps using a very thick, flat piece of cardboard instead. This reduces your risk of crashing the nozzle. You'll repeat the leveling procedure with a business card after your first try with cardboard.

Place the business card directly underneath the Attachment Mount on the Leveling Platform.

Unlock the Attachment Mount clamp. Insert your 3D Printing Head so that the nozzle sits directly on top of the business card, as shown in the second image and the third image with cardboard. Lock your 3D Printing Attachment with the clamp, as shown in the first image. Adjust the clamp as necessary. Do not plug the cable in yet.

Always verify that your Z is at its home position before inserting the attachment. Otherwise scary noises and damage can occur! The nozzle should be positioned in the Attachment Mount for leveling as shown in the second image.