Now that everything is set up, verified, and tested you will only have to follow these steps to print with BoXZY when you so desire:
Apply your printing surface (e.g. masking tape), home the Z, then insert your 3D Printing Head over a business card. Lock the Head in with the lever and remove the business card. (You do not need to repeat this process between prints unless you loosen or remove the Head.) Make sure your platform has a printing surface and nothing else on it.
Click Load to load your STL 3D file, as shown in the orange box in the image. Search Thingiverse if you would like to find one, or design your own in Fusion 360.
After selecting your preferred slicer and settings, click the Slice with button, shown in the blue box in the image, and allow it to complete.
Once it's done slicing the file, the slicer will automatically load the new G-code script into the G-code Editor and show you a 3D preview of the G-code.
Just press Start Print (shown in the pink box in the image), wait for it to heat up, and watch it print!
If you have any issues with print quality, start to learn about tuning your slicer settings and your machine here.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.