Your Milling Test file G-code will still be loaded from when you ran the air pass.
Verify one last time that your machine is in the correct 0, 0, 0 position and that your bit is resting on the material.
Press the Start Print button and watch the Milling Test execute onto your material.
When the machine comes to a complete stop (or if an error occurs) press the e-stop on the power station and then turn the Milling Head power switch to OFF.
You should now have the word “BoXZY!” cut into your piece of wood , as seen in the image!
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.