The circuit board is located beneath the fan cover on the back of your BoXZY. Make sure all the power is off before beginning this process.
To begin, unscrew the bolts on the back cover and remove it by lifting the cover upwards and towards you.
Be sure to remove the cover slowly to avoid tearing the wires.
You will need to disconnect the fan's wire plug at the top of the board. It's the black and red cord at the very top. Disconnect it by firmly pulling on the white white plug.
Once you have disconnected that wire, you can set the cover to the side to give you room to work.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.