Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 1 —

Step Type:

Drag to rearrange

We recommend that you level BoXZY's print bed before gluing the magnets. Large differences in the height of the spring bolts can change where the magnet is going to rest. Its very important for 3D printing and laser etching that the magnets are securely over the spring bolts and the print bed is level.

This can be accomplished by following steps 1-4 of the 3D Printing with BoXZY guide. Just for the leveling process you will need to temporarily place a magnet over each spring bolt and rest the unglued print bed on top.

Now to start the process of gluing the magnets, you first apply grease or lubricant to the head of each spring bolt. There are 3 of these that are found in each corner of the Z axis platform. This will prevent excess glue from sticking to the bolts.