Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Drag to rearrange

Be sure that each magnet is resting perfectly in the glued pockets of the build plate. And that the magnets remain centered on the spring bolts.

Apply medium pressure downward on the build plate to allow the glue to spread evenly over the magnet.

A good guide to determine if enough glue was used is to look down at the top of the build plate. A small portion of the magnets will be visible through holes in the corners. The glue should have spread over the visible area of the magnet. If no glue is visible from above you will want to carefully remove the build plate and add more glue.