Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 5 —

Step Type:

Drag to rearrange

At this point make sure your BoXZY is connected to your computer via the USB cord.

Now, open the arduino software. This would have been downloaded as part of your initial BoXZY set up. There should be an icon for it on your desktop.

Under the Tools tab find were it says Port. There should be one option for you to select. Select it. The COM number will be different for everyone. Also make sure all the other selections under the Tools tab match what is shown in the first picture including: Board, Processor, and Programmer selections.

Next, under the File tab click Open. Now is when we need to relocate the files we downloaded in the previous step.

Find the folder labeled Arduino_Heated_Bed. Double-click it and select the file called Arduino_Heated_Bed. Make sure you have the file selected and not the folder of the same name. Click open.

This should open an identical looking window but with the text for the heated bed settings.

Click on the Upload icon that looks like an arrow pointing to the right. It is located in the top left corner of the newly opened window, directly under the Edit tab.

It may take up to a minute to upload the new settings. You will know it is done when it reads "done uploading" at the bottom of the window. If there is an error be sure you are not connected in the BoXZY Interface at this time and that all the settings under Tools match what you see in the first picture of this step.