First, it helps to have a general understanding of how your final enclosure assembly should look.
This is a picture of an assembled enclosure viewing it at an angle from the back. Some things to take note of:
The back cutout fits closely around BoXZY's fan cover and filament drive.
There are small black handles on either side of the enclosure held on by 2 bolts.
Each corner joint is secured with 3 small corner brackets and a pair of bolts with each bracket. (Yes, you are right. If you look closely at the picture there are only 2 brackets visible securing the corner. The enclosure pictured is a prototype. Yours is new and improved!)
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.