Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

The wires were all fed into the dual gang box. Now we need to wire all three (3) Black (Live) wires together, all three (3) White (Neutral) wires together, and all three (3) (maybe 4) green GND wires together. Remember to feed wires into each brass fitting one-at-a-time.

Step #1: Take all three BLACK (Live) wires inside the dual gang box, and strip enough insulation off of the three (3) black wires to fit inside the brass fitting of a #11 set screw wire connector. Tighten setscrew with flat end screwdriver until tight against all three wires. Give all 3 wires a tug to ensure connection. Screw on black cap.

Step #2: Take all three WHITE (neutral) wires inside the dual gang box, and strip enough insulation off of the three (3) white wires to fit inside the brass fitting of a #11 set screw wire connector. Tighten setscrew with flat end screwdriver until tight against all three wires. Give all 3 wires a tug to ensure connection. Screw on black cap.

Step #3: Take all three GREEN (GND) wires inside dual gang box. There may be a 4th case GND wire. Strip enough insulation off of the (3 or 4) GND wires to fit inside the brass fitting of a #11 set screw wire connector. Tighten setscrew with screwdriver until tight against all three wires. Give all 3 wires a tug to ensure connection. attach cap.

Step #4: Screw on the lid of the dual gang box.

Step #5: Screw the dual gang box to the wooden panel to secure it in place.