Guides I've Contributed To
Manual control of gantry with a usb controller (xbox for example)Does anyone know whats involved with using an gaming controller to control the various axis movement with a controller. Is th...
Answer to: Image Opens Larger Than FIle Usedchances are the ppi are different between the files you’re seeing issue with. from the help files: 2.2 Laser Etching with BoXZY (1) Scaling your image. When preparing an image to etch, you want to scale your image relative to BoXZY's native resolution: 254 pixels per inch (ppi). You can set image resolution in your image editor. (2) Sizing your image. When sizing your image file, remember that 1 pixel = 0.1mm to BoXZY. For example, if you want your etch to be 20mm wide, you'll need to create an image file that is 200 pixels wide.
Answer to: STL to 3D Tool PathsThere are a few options, I would consider different software. Winston Moy made a good video walking you through stl to machined part. https://www.youtube.com/watch?v=q-ZZkUDpEXU If you’re set on just using easel. you will have to slice it and insert the cross sections into easel at different depths if that makes sense. I’d just try Fusion though.