Cutting magnet material with laser attachmentHi all, I have a magnet material thickness 0.42 mm, Could it be possible to cut this material using cut outline, and what cou...
Answer to: Clicking sound during Y-axis travel.@Master Yoda, you told that, 'I got the clicking sound under control.' I have the same problem does exists from time to time. How did you make under control that clicking sound? Could you explain it? Thanks.
Answer to: Cutting magnet material with laser attachmentThanks for the reply but my material is not shiny nor transparent. it is nearly blackish. So I found that the laser focus is not accurate. Is there a method to make laser focus much more accurate? Or Can we change the laser with more strong one? Links and infos are welcome. Thanks.
Answer to: Cutting magnet material with laser attachmentI have tested with the following values but no result. Here is the values: Cut Outline Etch Power: 0-100 Focus Material: 0.4 mm Z: 51.1 mm Pixel Clipping: 20-80 How can I set the accuracy of the laser focus? Maybe there are some missing parameters in Boxzy.dll, there could be repeat parameter in the application to cut thick materials (to follow the pattern repetition). And the second thing is when you click the Focus button, it calculates again and again and the focus of Z value getting calculated faulty. Thanks